UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Clansman IBMS

Sparky67 · 27th Sep 2018, 2:21 pm

Thanks Richard. Maybe these boards went back to Widney Aish then? I will drop Mike an email. Fortunately the tech description has given me enough to start with. The PSU is open on my bench at the moment (next to a 1950s dynamo in bits...) and new tants are on order. Those will be the first pass. If that doesn't cure it I'm going to have to start tracing the DC circuit out by hand by the look of it.
Cheers,
Martin

27th Sep 2018, 2:21 pm	#5
Sparky67 Heptode Join Date: Feb 2008 Location: Great Barr, Sandwell, West Midlands, UK. Posts: 589	Re: Clansman IBMS - Low Volts Fault Thanks Richard. Maybe these boards went back to Widney Aish then? I will drop Mike an email. Fortunately the tech description has given me enough to start with. The PSU is open on my bench at the moment (next to a 1950s dynamo in bits...) and new tants are on order. Those will be the first pass. If that doesn't cure it I'm going to have to start tracing the DC circuit out by hand by the look of it. Cheers, Martin