Quote:
Originally Posted by philoupat83
damage the model will not be able to tell us more i hope nothing serious
i have corrected the latch here is my final plan I transfer on kicad and prepare the gerber for jlpcb I send it Monday
for x I connect it to vcc but with the possibility to cut
Finally we arrive at the end of the recreation. my processor begins to vibrate with impatience
|
I put the suspected faulty 74LS00 back in and it works again, but still no latch - so I just need to make a test harness to see if just those gates are faulty and I have just been lucky until now - if so I will buy another - well I have already ordered a pack of 10...
My chips (CPU and RAM) is now in Stanstead waiting for customs so it is getting closer to me building a SCRUMPI 1 with a 500 as well - I will make the PSU while I wait...
On the PCB I think you misunderstood me IC12 and IC13 should be totally separate so either can be IN or OUT or both can be the same. So I suggest the following (MR should still be tied to ground)