UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Using Bellset 41 with a Candlestick 'phone.

Dave Moll · 30th Jun 2011, 5:23 pm

What model of candlestick 'phone is it?

I was (presumably falsely) assuming a model 150, but that doesn't have terminals numbered as per your above post.

By the way, given that your 41 is just a bell (with, presumably, only two terminals in use), I would have thought this would need to go between the black and green wires of your B/R/G/Y line cord - with the 3.3K resistor in series with the bell if necessary. Where is it currently connected?

30th Jun 2011, 5:23 pm	#6
Dave Moll Dekatron Join Date: Feb 2005 Location: West Cumbria (CA13), UK Posts: 6,127	Re: Using Bellset 41 with a Candlestick 'phone. What model of candlestick 'phone is it? I was (presumably falsely) assuming a model 150, but that doesn't have terminals numbered as per your above post. By the way, given that your 41 is just a bell (with, presumably, only two terminals in use), I would have thought this would need to go between the black and green wires of your B/R/G/Y line cord - with the 3.3K resistor in series with the bell if necessary. Where is it currently connected? __________________ Mending is better than Ending (cf Brave New World by Aldous Huxley) Last edited by Dave Moll; 30th Jun 2011 at 5:28 pm. Reason: by the way...