Re: 'Spirits of Salts' as soft solder flux?
And, Mark,
Don't forget to advertise the fact that you have used acid flux to solder.
It would just be nice to know that in a year ot two my precious amplifier, purchased in Manchester, with said transformer has dissolved into snot on the corner of the chassis.
OT I "figure " is output transformer??. Try a little 600 or 800 grit wet n dry paper. NO ??
try a fine small file. Abrasive file maybe.
WHAT sort of varnish was used in the original construction of the said OT ?.
With all my suggestions meant in best humour.
Joe
|