Re: Beocord 5000 (Type 4715) Capstan Motor Speed
Thanks for that.
TR2 collector should be approx -10V in Stop and -6V in Play mode.
I have the -10V but it's at -0.65V in Play.
As you point out, this suggests that TR2 is turned on fully to sink the motor current.
I could run the motor directly off the supply by removing the rectifier and bridging the two ac terminals with a 2R2 resistor but as it's maxxing out already, I'm not sure what it would prove except that it's drawing too much current.
|