Re: Bush AC34, no sound.
Using TRADER SHEET component designations.
The red wire which terminates on C29 shouldn't be there, as C29 is in an entirely different part of the circuit. It should in fact go to R20.
With any luck the other red wire on R20 goes to C36 and V5 pin 7.
Just checked the picture in post #74. The other wire does indeed go to C36 and V5 pin7.
Where does the green wire on the UL41 pin 4 go to?
__________________
Graham. Forum Moderator
Reach for your meter before you reach for your soldering iron.
|