Quote:
Originally Posted by Audio1950
At the very back of the "ball" end of the pickup arm, there is a hole which has a screw in the bottom. This is connected to a small bracket, connected to a spring. Turning tha screw adjusts the weight, but you need a very fine screwdriver to turn the screw. Be aware though, that after all this time, the plastic of the arm will be very brittle, and forcing the screw may shatter the mountings of the bracket.
Barry
|
Are you sure that's not for adjusting the arm height? See photo of what Barry is talking about. I've looked at the schematic and I can't quite tell what it does!
Also see my screw to the left, this goes through the centre of the tracking weight spring and effectively makes the spring stronger, which therefore makes the arm lighter... just a trial at present but seems to work!