Re: Racal 9081 repair questions
Hello.
The Phase Detector Assembly is 19-0846.
The tuning voltage I have miss-stated it should have been the varactor voltage.
It's in lock now, it's when I rotate the 'Tune' control even at a rapid rate, I don't get the required varactor range. The ROM which controls the upper and lower frequency stops, for some reason mine is 496 to 560MHz.
Had a further look this afternoon with a logic analyser on the Blanking circuits, as when I applied an external supply to the varactor, monitoring TP9 in the time domain 828us (256MHz) to 480us (520MHz)
|