Re: Ekco A320
Yes the pinouts may look the same but there is a subtle difference
Snips from r-type.org
It's all to do with pin 9, 4 and 5
On an ECC85 the 6.3V heater supply is between pins 4 and 5.
If you want to run an ECC81 at 6.3V you need to join pins 4 and 5 together and connect the heater supply between 4,5 and pin 9.
Otherwise you need to supply 12.6 V between pins 4 and 5
Hope that helps.
Cheers
Mike T
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk
Last edited by Cobaltblue; 19th May 2021 at 4:15 pm.
Reason: Crossed with Paul
|