Quote:
Originally Posted by bigus01
Get o/c across T4 &T5 if I disconnect green wire from T6.
Regards
|
Unless you've altered the wiring in the handset the WHITE wire should be on T6.
Going on the photos I'd agree with Russell that the connexions should be:—
T4 - Red Wire - Bottom Left Handset Terminal (The one with the spike)
T5 - Green Wire - The Two Linked Right Handset Terminals (M1 and R2)
T6 - White Wire - Top Left Handset Terminal (R1)
The only other straw I can clutch at is suggesting you test for resistance between M1 and the hole at the extreme right where the curved fork thing goes that touches the back of the original transmitter.