UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Nungesser · 9th Feb 2019, 2:35 pm

Thank you for replying so quickly.
In answer to your questions.

When I press the pressel I hear a I hear a click inside the 320. Also what transmission I am listening to goes off as I press transmit but I hear no side tone in my headset or my hand set.(both headset/hand set work on my other 320).

So in summation. Something happens when I press the pressel on ssb / am but no TX,
side tone or meter movement.
When pressing the pressel in tune mode no noise or meter movement.

Where to start?
When I open up the unit soon I will look for anything disconnected/loose or any obvious damage and of course the PSU but really I am at a loss after that.

Kind Regards

David

9th Feb 2019, 2:35 pm	#15
Nungesser Retired Dormant Member Join Date: Dec 2015 Location: Chipping Norton, Oxfordshire, UK. Posts: 11	Re: Clansman PRC320 problems Thank you for replying so quickly. In answer to your questions. When I press the pressel I hear a I hear a click inside the 320. Also what transmission I am listening to goes off as I press transmit but I hear no side tone in my headset or my hand set.(both headset/hand set work on my other 320). So in summation. Something happens when I press the pressel on ssb / am but no TX, side tone or meter movement. When pressing the pressel in tune mode no noise or meter movement. Where to start? When I open up the unit soon I will look for anything disconnected/loose or any obvious damage and of course the PSU but really I am at a loss after that. Kind Regards David