Quote:
Originally Posted by Station X
That's useful. (The sketch in post 177 that is) Is there a direct connection between pin 2 (anode) of the 42 and the top inner terminal of the output transformer or does it go via the tone control?
I assume that the "speaker loom" now carries just two wires to the speaker and the other pins are redundant?
|
Yes pin 2 of 42 is wired to inner O/P TX tag the 250v one that has one end of the 0.0047.....0.047...tone pot
The chassis to speaker loom still carries 4 wires and looks original