UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

oldticktock · 21st Dec 2009, 8:02 pm

ok as follows, can hear radio 4 i think its got clive anderson on, as i said very quite

valve 42

pin 2........250v
pin 3........260v
pin 4........0v.................ohms see below
pin 5........10v......330ohms

had to read had avo 7 on 1MEG and backed off Q seems to read 10,000 but such a small defelection its hard to read.

Valve 75

pin 2......250v
pin 5......4-5v fluctuates
T/C........0v

It is radio 4 ,The Archers just came on.

21st Dec 2009, 8:02 pm	#171
oldticktock Retired Dormant Member Join Date: Nov 2009 Location: Weardale, UK. Posts: 1,981	Re: Newb Stumped on a Derwent ok as follows, can hear radio 4 i think its got clive anderson on, as i said very quite valve 42 pin 2........250v pin 3........260v pin 4........0v.................ohms see below pin 5........10v......330ohms had to read had avo 7 on 1MEG and backed off Q seems to read 10,000 but such a small defelection its hard to read. Valve 75 pin 2......250v pin 5......4-5v fluctuates T/C........0v It is radio 4 ,The Archers just came on.