View Single Post
Old 17th Jun 2021, 9:38 am   #3
Andrew Wyard
Diode
 
Join Date: Mar 2021
Location: Bracknell, Berkshire, UK
Posts: 4
Default Re: Advance E2 Signal Generator fault

Hi Peter,
Yes, I disconnected the feed to all the outputs on the tag strip under the wafer sw.

I think over the weekend I will have another look at readings across the op coupling windings, I think they were fairly sensible but there's something pulling it down. I suppose its possible someone has put some volts on the full RF connector and partly fried one or more op winding.

Thanks, Andrew
Andrew Wyard is offline