UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

G4GIRLX0 · 12th Feb 2019, 4:50 pm

Well I guess that is a possibility. Still a little surprised no body seems to have a copy within the group. However, I have had success in solving problems but still have an issue of Oscillator pulling, virtually nothing at 2 -3 MHz and 4.5 - 5.5 MHz But above 3 MHz on the low range and 5.5 MHz on the High range the oscillator pulls badly! Found a post from 2012 with the same problem but no real answer to it.

What would we do if we never had a fault!!

Cheers

Ian

12th Feb 2019, 4:50 pm	#7
G4GIRLX0 Retired Dormant Member Join Date: Jan 2018 Location: Bedford, Bedfordshire, UK. Posts: 16	Re: Emer F 253/2 Well I guess that is a possibility. Still a little surprised no body seems to have a copy within the group. However, I have had success in solving problems but still have an issue of Oscillator pulling, virtually nothing at 2 -3 MHz and 4.5 - 5.5 MHz But above 3 MHz on the low range and 5.5 MHz on the High range the oscillator pulls badly! Found a post from 2012 with the same problem but no real answer to it. What would we do if we never had a fault!! Cheers Ian