UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Ed_Dinning · 29th Nov 2006, 9:13 pm

Hi , not sure of their availability in germany of if it should be Philips rather than Mullard, but in the UK Mullard produced a lot of 1 page application notes in the 50's and 60's on valve circuits in radio and TV. These were usally just a single stage circuit such as an IF amp or a discriminator.
Their "Mullard Valve Data Manual" (TV &FM), publishedin 1958 has most of these sheets as well as much other information. It covers a lot of the design of receivers

Ed

29th Nov 2006, 9:13 pm	#19
Ed_Dinning Dekatron Join Date: Jan 2004 Location: Newcastle upon Tyne, Tyne & Wear, UK. Posts: 8,196	Re: superhet Hi , not sure of their availability in germany of if it should be Philips rather than Mullard, but in the UK Mullard produced a lot of 1 page application notes in the 50's and 60's on valve circuits in radio and TV. These were usally just a single stage circuit such as an IF amp or a discriminator. Their "Mullard Valve Data Manual" (TV &FM), publishedin 1958 has most of these sheets as well as much other information. It covers a lot of the design of receivers Ed