View Single Post
Old 6th Nov 2019, 2:09 pm   #12
its ur aerial
Hexode
 
its ur aerial's Avatar
 
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 418
Default Re: AVO Meter, frequency response.

I have been asked to measure the out put voltage of a Induction Generator at work, its out put voltage is 650 Volts at approx 7.5Khz, with a current rating in excess of 80 Amps, ( Elf & Safety, so will need caution ) this voltage they want measured within + or - 5 Volts, hence I don`t think 5v difference will be measurable and visible on the Scope display.
Tried it with a couple of Fluke meters, not sure of the Model, buts its the type were you can detach the display from the Meter Body, but the readings were inaccurate by about 40%.
So its time to get out the old AVO 8 and I have a Mk 9.

Ken, G6HZG.
__________________
Life is not Hollywood, life is Cricklewood.
its ur aerial is offline