View Single Post
Old 20th Dec 2009, 2:53 pm   #49
oldticktock
Retired Dormant Member
 
Join Date: Nov 2009
Location: Weardale, UK.
Posts: 1,981
Default Re: Newb Stumped on a Derwent

yes it spits down to the 75 looks like the first small pin after heater

just to be clear, the chassis end point appears to be a tag which is on the base of valve 75's holder looks like the chassis rivet point with a leg on it, the neg end of the smoothers are on this as well.

one pin of (4 pin loom)...... (ht rail).....(220K).....split here off to 75.(0.1uf).... hits centre of new wire one side to pin 4 grid 1 other to chassis (tag on rivet of 75 holder
oldticktock is offline