UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Dave Moll · 15th Mar 2018, 9:16 am

The BBC Micro does indeed output at TTL levels. To cope with this I made up a lead with series resistors to attenuate the signals down to the 1V P-P required by the SCART on the TV/monitor I used with it. I don't remember off-hand what value I used, and would need to open up the plug to check if the information is needed.

15th Mar 2018, 9:16 am	#12
Dave Moll Dekatron Join Date: Feb 2005 Location: West Cumbria (CA13), UK Posts: 6,127	Re: SCART problem with Ferguson TV set The BBC Micro does indeed output at TTL levels. To cope with this I made up a lead with series resistors to attenuate the signals down to the 1V P-P required by the SCART on the TV/monitor I used with it. I don't remember off-hand what value I used, and would need to open up the plug to check if the information is needed. __________________ Mending is better than Ending (cf Brave New World by Aldous Huxley)