View Single Post
Old 20th Jul 2021, 4:06 pm   #3
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 7,514
Default Re: MK14 Programming Interface

You didn't have to fettle any of the time delays? For some some reason most people do. I'm guessing your issue VI has a VDU friendly 4.00Mhz crystal, which should theoretically make it even more sensitive to programmer overspeed - or maybe you currently have a 4.43MHz crystal fitted?

When you come to connect OrtonView the system slowdown caused by OV will mean that you will have to throttle back the keying speed of the uploader a little bit, unless you take pains to disable OV during uploads.

I see you've used a direct connection to the reset input (only available on your issue VI) for maximum neatness.

Did it 'Just work?' If so, yet another triumph for your board designing skills.

Last edited by SiriusHardware; 20th Jul 2021 at 4:13 pm.
SiriusHardware is offline   Reply With Quote