Quote:
Originally Posted by Jac
So far my setting of the carrier pot (in fact the pot to get around the video clamp) about half-way seems to be good.
|
That's interesting because at around half way the picture is good but the sound is distorted. I'm sure it was ok until I removed the FPGA board to flash a newer firmware so I check and see if I've damaged something.
Quote:
Originally Posted by 1100 man
Have you ever used the Murphy with a different standards converter? It may be an alignment issue with the set rather than a HH problem.Nick
|
Yes the vertical hold on my V310 is fine when using an aurora. With the hedghog I only have a few degrees of adjustment between loss of lock and nasty spluttering/buzzing sound.
Regards
David