View Single Post
Old 20th Oct 2019, 5:28 pm   #2
G3PIJpeter
Hexode
 
Join Date: Nov 2011
Location: Chippenham, Wiltshire, UK.
Posts: 319
Default Re: Yaesu FRG-7 main frequency tuning dial broken/sticking

There's a nut on the top of the main 0-1000 scale drum (under the S-meter). Make sure that it is tight enough to make sure the drum does not slip.

If the drum is securely fixed and not slipping, then you could remove the nut and then the drum to look underneath. Not sure if that will reveal the drive mechanism but it is sensible to check the mechanics before the electronics.

- Peter (G3PIJ)
G3PIJpeter is offline