Quote:
Originally Posted by Junk Box Nick
I'd like one if it is possible. My forays using Ferric Chloride are long in the past and were never very successful. Your work is impressively neat!
|
I'll reserve one for you Nick and will drop you a PM for details.
I've just finished a batch of six PCBs, so with two going to Nick '1100 man' and one to you, that leaves three available, which I'll list in the 'items for sale' section of the forum. The boards are drilled and tinned, and I've done a 'test fit' with a coil in the L1 & L2 positions to make sure the coils fit in OK. I've soldered eight terminal pins for the off-board connections, and have also fitted a turned pin DIL socket fitted for the IC.
Thanks for your interest, and kind words Nick.