UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

John M1JWR · 19th Nov 2018, 11:48 am

forgot to say removed resistor and it checked good, forgot the pads though
as it was late when i checked again after refitting it was back to low resistance,
did a brief recheck of pin 7 on audio chip and its back to 1.45v.

19th Nov 2018, 11:48 am	#51
John M1JWR Pentode Join Date: Nov 2018 Location: Carlisle, Cumbria, UK. Posts: 244	Re: Cybernet PTBM121D4X problems forgot to say removed resistor and it checked good, forgot the pads though as it was late when i checked again after refitting it was back to low resistance, did a brief recheck of pin 7 on audio chip and its back to 1.45v.