UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

djjones · 18th Feb 2018, 9:29 pm

I've found some washers that I think will do the job.
The top of the 'drive wheel' is 27mm across at the top, so I think the original rubber may have been 1" diameter, so I've ordered 26mm. The depth is 12mm, so the replacements will be 2 x 6mm. Diameter of wheel where washers locate is 19mm, so I've ordered 18mm internal diameter, which hopefully will be a tight fit without making them impossible to get on.

One of idlers is a bit 'soggy' if anybody has or knows where I can buy a replacement 63mm idler (see pics), I would be very grateful

18th Feb 2018, 9:29 pm	#23
djjones Retired Dormant Member Join Date: Mar 2017 Location: Harrow, London, UK. Posts: 11	Re: Power plug for Wyndsor Vanguard I've found some washers that I think will do the job. The top of the 'drive wheel' is 27mm across at the top, so I think the original rubber may have been 1" diameter, so I've ordered 26mm. The depth is 12mm, so the replacements will be 2 x 6mm. Diameter of wheel where washers locate is 19mm, so I've ordered 18mm internal diameter, which hopefully will be a tight fit without making them impossible to get on. One of idlers is a bit 'soggy' if anybody has or knows where I can buy a replacement 63mm idler (see pics), I would be very grateful Attached Thumbnails