UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Gi4CZW Cliff · 31st Jul 2020, 11:39 am

I have been asked to find information for the above receiver. Friend has no internet, so no photo but a control knob shows the following functions. From anticlockwise, " off, batt V, batt check, DC, check noise, measure noise, low sense ". Set covers 100 to 220 MHz and has eleven valves and Murata coils inside. I hope I have this information correct, as it was over our 80m qso. I searched this forum and the internet but didn't find it.
stay safe and regards,
Cliff.

31st Jul 2020, 11:39 am	#1
Gi4CZW Cliff Pentode Join Date: May 2011 Location: Enniskillen, Fermanagh, UK. Posts: 188	Receiver Radio 24A M U R. any info I have been asked to find information for the above receiver. Friend has no internet, so no photo but a control knob shows the following functions. From anticlockwise, " off, batt V, batt check, DC, check noise, measure noise, low sense ". Set covers 100 to 220 MHz and has eleven valves and Murata coils inside. I hope I have this information correct, as it was over our 80m qso. I searched this forum and the internet but didn't find it. stay safe and regards, Cliff.