Quote:
Originally Posted by Tim
I did the whole scale. The printing on the old scale was very poor so I removed it completely and thoroughly cleaned the glass. It was quite easy to flip the image and get several copies made exactly the same size as the glass/old one. Applying one over the other wasn’t difficult. I think I applied the first one , then it was simply a matter of aligning the second one over the top so the scale was” in focus”, for want of a better term.
|
Thanks for reading Tim, and for your comments.
Just to add for the avoidance of doubt, I used new glass cut to size in my experiments - I didn't try to tidy up or re-use an existing dial. I didn't have a problem with the artwork, flipping the image or in printing & applying the decals. The only problem was in getting the second decal to register accurately all all points with the first decal, which - try as I might - I wasn't able to achieve.
Great news that you managed to overcome that issue, which hopefully will encourage others to have a go.