View Single Post
Old 15th May 2021, 12:36 pm   #12
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,738
Default Re: Bush DAC10 Speaker Revisited

Quote:
Originally Posted by ajgriff View Post
Do you have any 16 swg sheet aluminium? You might be able to make a suitable 'part circle' shim by forming the aluminium around something like an appropriately sized socket (as in spanner). Just a thought.

Alan
Sounds good to me: 16 SWG = 1.625mm / 0.0640"

In my socket set an 11mm socket is 15.8mm diameter.

As you say Alan, if not quite a full circle that would give some 'wriggle room' to adjust the diameter to be a good fit.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is online now