Re: AZ31 as rectifier for a stereo Mullard 3-3?
Hi.
I use an EZ81 in my stereo 3-3, its been in it for some years now and is well used never had any issues.
The AZ31 is a filamentary valve so will conduct a long time before the EL84's warm up so the HT will rise significantly. Go for the EZ81 off a separate 6.3v winding. or a GZ34 off a separate 5v winding.
The heater insulation is good enough on both the above valves to run off the normal heater supply and the GZ34 will run via suitable dropper resistor of 1.46r or 1.5ohms happily
__________________
Cheers,
Trevor.
MM0KJJ. RSGB, GQRP, WACRAL, K&LARC. Member
|