UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Brookes1975 · 8th Dec 2018, 7:27 pm

Hello all, I'm in the process of rewiring a German W48 phone for UK BT line and so far I have got the phone ringing and receiving incoming calls. My problem is that I cannot dial out. Sometimes I get nothing, sometimes I get number not recognised and sometimes I get there is a fault message. I have the phone wired with red and and white bt to terminals A and B and a 3.3k resistor soldered between the original green wire and left hand capacitor terminal if viewed from the rear. Everything else is stock. Dialer itself is in good serviceable condition and wired in correctly. Help greatly appreciated. Scott.

8th Dec 2018, 7:27 pm	#1
Brookes1975 Retired Dormant Member Join Date: Dec 2018 Location: Leek, Staffordshire, UK. Posts: 1	W48 rewire help please Hello all, I'm in the process of rewiring a German W48 phone for UK BT line and so far I have got the phone ringing and receiving incoming calls. My problem is that I cannot dial out. Sometimes I get nothing, sometimes I get number not recognised and sometimes I get there is a fault message. I have the phone wired with red and and white bt to terminals A and B and a 3.3k resistor soldered between the original green wire and left hand capacitor terminal if viewed from the rear. Everything else is stock. Dialer itself is in good serviceable condition and wired in correctly. Help greatly appreciated. Scott.