View Single Post
Old 29th Nov 2020, 11:11 pm   #8
Tim
Dekatron
 
Tim's Avatar
 
Join Date: Jan 2003
Location: Bradford on Avon, Wiltshire, UK.
Posts: 3,310
Default Re: Mini lockdown project

Thanks all. Now sitting listening to it! A nice easy one. Usual wax cap replacement, and, unusually( for these) HT can was u/s. Anyway a couple of 47mF @ 450 volts cobbled in, a dodgy valve holder on the UF41 causing intermittent open circuit heater chain, and a silly wiring error by your truly. Anode resistor for the audio triode had drifted high as well so treated it to a metal film 1% which was all I had.
Not finished( they rarely are) but it’s the best I could do with the limited box of bits I brought in with me. HT caps will be tidied up and more work to do on the dropper. The grey ones always seem to go, unlike the green ones fitted to later models.
Ha ha, yes a Covid pre op TEST. Blooming spool chucker.

Yes I like “ Trouble in store”, but my favourite is “ The early Bird”( there’s a nice radio in that one too. A Ferguson I think). I am fond of “ The road menders” too.
Attached Thumbnails
Click image for larger version

Name:	F10B65C4-490E-47E5-B1CA-C312CAA1E440.jpg
Views:	136
Size:	78.0 KB
ID:	221523   Click image for larger version

Name:	88561E4E-0D99-4927-A81F-E9B410A4F07A.jpg
Views:	135
Size:	97.2 KB
ID:	221524  
__________________
"Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly."

Last edited by Tim; 29th Nov 2020 at 11:17 pm.
Tim is offline