[Hybrid tellies]

I could hear weak video signals on R1 and R2 on my handheld scanner but nothing resolved on my tv setup.
Closer investigation reveals that sometime during the winter I had disconnected the aerial leads from the amp to my D100 tuner and the output lead from the D100 wa also pulled out and missing. It took about an hour to sort and link out an aerial amp which I discovered had failed. By the time I had everything up and running the opening had gone.
Hopefully I will be ready for the next opening. It was nice to see R1 clear of baby monitor interference. I use to use two filters so I could see some of the stronger R1 signals but now I can connect the aerial straight into the D100 tuner without any problems. A check with my scanner confirms that the baby monitor channels are now clear with just a few very weak carriers heard.