HI,
I wanted to put this in the thanks thread,but not sure if one can put in pictures.
Success/thank you story
I wish to thank (Glyn Welsh Anorak) for the Nombrex C.R.32 Test
Bridge he gave me on the 7th of March.
The first problem was to get the knobs off as the grub screws
were rusted solid, so I WD-40 them and left them a couple of days
and I had to force them off.
I then ordered some more new control knobs.
While waiting for the above knobs to arrive I got on with the next
problem to replace the three transistors, as the HV oscillator
was not working (2g371)and the two amplifier transistors (2g374)
had corroded legs, I did not have any of these so I put in place
2N3906,s and replaced the (2x10uf caps) and the (100uf Lt cap)
Then cleaned all controls and Sprayed cabinet, tested and waited for
knobs to arrive.
It is now fully functioning with new knobs.
A nice little Instrument to go with my
Lafayette CR analyzer TE-46.
Heathkit IB-5281 RLC Bridge.
Hameg L.C. meter HM.8018.
Thanks again Glyn.
gezza123