UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Bush VHF-41 Refurb.

davidgem1406 · 20th Apr 2019, 4:29 pm

Hi Frank,
I guess you mean a 75 ohm aerial on the roof for a proper aerial?
If so I don't have such an aerial. I use a long wire that goes round the room I use.
Usually that will supply a quite adequate FM signal for older valve sets.

Without an aerial there is zero to be had.

Hi John,
Thanks for that info, somehow I knew somebody would say that.
It seems as though the FM is junk and not really worth having.
Any idea as to the Philips sets that used 2 x EF80?

Regards,
Dave.

20th Apr 2019, 4:29 pm	#4
davidgem1406 Heptode Join Date: Feb 2011 Location: Sheerness, Kent, UK. Posts: 936	Re: Bush VHF-41 Refurb. Hi Frank, I guess you mean a 75 ohm aerial on the roof for a proper aerial? If so I don't have such an aerial. I use a long wire that goes round the room I use. Usually that will supply a quite adequate FM signal for older valve sets. Without an aerial there is zero to be had. Hi John, Thanks for that info, somehow I knew somebody would say that. It seems as though the FM is junk and not really worth having. Any idea as to the Philips sets that used 2 x EF80? Regards, Dave.