Quote:
Originally Posted by QUADGOD
Doesn't look like a simple fix ..for me that is...
|
Having checked the basic controls, it does indeed look as if something is amiss. You should at least get some deflection on the signal strength meter with the tuning meter moving left-centre-right when tuning through a station.
Just a thought, there are two slots for optional Dolby B decoder boards however when these are not fitted two jumper boards have to be installed otherwise the fault symptom is similar. To check what is fitted unscrew the left hand side cabinet panel and you should have one of the board options installed. If link boards (default) then make sure Noise Reduction is only set to normal.
Rich