View Single Post
Old 2nd Oct 2020, 7:36 am   #12
MrBungle
Dekatron
 
MrBungle's Avatar
 
Join Date: Jun 2016
Location: London, UK.
Posts: 3,687
Default Re: Drilling large finned heatsink

Quote:
Originally Posted by David G4EBT View Post
Data sheet says:

Quote:

‘Must be stored at between 2 and 8 degrees C. Below 2 or above 8 C adversely affects the properties’.

Unquote.

No wonder they’ve only got one in stock! (Shelf life?).

Screws don’t have a limited shelf life and when components are screwed onto heat sinks they don’t come unstuck.
Being CPC it won’t be stored properly either.

With these general mechanical issues I practice avoidance and try and look at the problem from different perspectives.
MrBungle is offline