View Single Post
Old 14th May 2012, 8:14 pm   #3
Marconi_MPT4
Hexode
 
Marconi_MPT4's Avatar
 
Join Date: Mar 2011
Location: Dorset, UK.
Posts: 418
Default Re: Labgear CM 6052/CB PAL Colour Bar Generator

Hi Richard,

On these colour bar generators, the extra socket is for directly triggering an oscilloscope. Both horizontal and vertical signals are available and are of sufficient amplitude to obtain a satisfactory trigger with most gear.

I have a service manual for this model scanned from a photocopy received from Pye Unicam some 30 years ago, but it is too large to post here. PM me if you would like a copy.

Cheers

Rich
__________________
To an optimist a glass is half full; a pessimist half empty; an engineer twice as big as need be!
Marconi_MPT4 is offline