UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - PCMA001S Variable Inductor Coil Identification/Replacement?

yaggiboom · 14th May 2021, 7:23 pm

I had an idea, I have a cybernet with a PTBM131A4X circuit board and they are virtually the same as the Nato PCMA001S. Baycliffe Corporation made all of those boards after Kyocera bought Cybernet for their research and development division. The CB division was hived off, contracts honoured and then it was full scale cheapening the whole process. Anyway, the coil in question is a Toko and marked with 07MA 014N 24VG... Hope that helps.

14th May 2021, 7:23 pm	#9
yaggiboom Diode Join Date: May 2021 Location: New Forest, Hampshire, UK. Posts: 3	Re: PCMA001S Variable Inductor Coil Identification/Replacement? I had an idea, I have a cybernet with a PTBM131A4X circuit board and they are virtually the same as the Nato PCMA001S. Baycliffe Corporation made all of those boards after Kyocera bought Cybernet for their research and development division. The CB division was hived off, contracts honoured and then it was full scale cheapening the whole process. Anyway, the coil in question is a Toko and marked with 07MA 014N 24VG... Hope that helps.