UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

mole42uk · 10th May 2021, 9:20 pm

Here's an oddball - I discovered this in my loft. It's is absolutely something I will have made, but I don't remember what it is for!

The scanner and PSU boards are ones I recognise but I don't remember where from, but the RF bit is one I don't remember at all. It may be for the 35MHz or 459MHz model control bands....there's a 10MHz crystal on the RF board

10th May 2021, 9:20 pm	#1
mole42uk Nonode Join Date: Aug 2010 Location: Resolven, Wales; and Bristol, England Posts: 2,614	DIY Spectrum Analyser Here's an oddball - I discovered this in my loft. It's is absolutely something I will have made, but I don't remember what it is for! The scanner and PSU boards are ones I recognise but I don't remember where from, but the RF bit is one I don't remember at all. It may be for the 35MHz or 459MHz model control bands....there's a 10MHz crystal on the RF board Attached Thumbnails __________________ Richard Index: recursive loop: see recursive loop