UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Courtney Louise · 14th Jun 2006, 6:12 pm

Hi Ed and everyone else...

Well I finished recapping my IF stage and connected the ht back up to it and voila I didn't need the meter across the A1 anymore and the HT came up to 200v on the A1.

Now the problem is I only have my Aurora as a signal and I get nothing out of the TV but a blank raster....

How on earth do I fault find an IF stage with no test equipment like that?

Andi

14th Jun 2006, 6:12 pm	#65
Courtney Louise Octode Join Date: Sep 2005 Location: Welshpool, Powys, Wales Posts: 1,327	Re: TV22 Restoration Hi Ed and everyone else... Well I finished recapping my IF stage and connected the ht back up to it and voila I didn't need the meter across the A1 anymore and the HT came up to 200v on the A1. Now the problem is I only have my Aurora as a signal and I get nothing out of the TV but a blank raster.... How on earth do I fault find an IF stage with no test equipment like that? Andi __________________ *33, 45, 78, around and around they go...* Last edited by Mike Phelan; 14th Dec 2007 at 9:33 am. Reason: Typos