UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Electronpusher0 · 10th Jun 2021, 8:03 pm

Ref your need to move on and use a patch lead solution instead of a "proper" valve base panel with a rotary switch.
I have done this and it works well. I have also made up a matrix of brass strips, two rows at right angles to each other with insulation between rows and between the two sets of rows and used ordinary 4mm "banana" plugs to short between the cross points to program the connections.
see the pictures.

Peter

10th Jun 2021, 8:03 pm	#3
Electronpusher0 Nonode Join Date: Jun 2016 Location: Bognor Regis, West Sussex, UK. Posts: 2,300	Re: AVO two panel tester strange fault Ref your need to move on and use a patch lead solution instead of a "proper" valve base panel with a rotary switch. I have done this and it works well. I have also made up a matrix of brass strips, two rows at right angles to each other with insulation between rows and between the two sets of rows and used ordinary 4mm "banana" plugs to short between the cross points to program the connections. see the pictures. Peter Attached Thumbnails