View Single Post
Old 8th Dec 2017, 5:05 pm   #19
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,288
Default Re: Megger MIT310 with corroded? battery terminals

I was faced with this problem recently with one of those "Rugged Radios" used by builders. They use 2 AA cells to maintain the clock and presets. These had corroded and totally dissolved one of the tapered coil contact springs. I slid out the brass strip, cleaned it and soldered what looks like a phosphor bronze coil spring to it. I've no idea where the spring came from. Every time I scrap something, all the springs it contains get slung in to a plastic box and this was one of them. I could have used a spring taken from a battery holder, but preferred not to destroy one.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is online now