View Single Post
Old 8th Feb 2019, 9:05 pm   #12
Trigon.
Hexode
 
Trigon.'s Avatar
 
Join Date: Jun 2018
Location: Buckinghamshire, UK.
Posts: 382
Default Re: Confusion over DIN sockets

Pin 1 on the leftmost socket is a low level input (@'2mV').

Pin 1 on the middle socket is a high level input (@'80mV'), potted down via a 1M and a 22k to be comparable with the low level input.

The inputs are selected via switch '2' which is shown in the low level position, with the potted down high level input shorted to ground.

The switches look rather like 'links' in the circuit diagram, which may be a source of confusion ?

Cheers
Trigon. is offline