Re: Toasted Avo 8 Mk V shunt
Thank you very much for your offer, I would like one to get it working again, but do you know what is missing from the cut ends of the 4 wires shown in the attached picture and perhaps why have the red & black wires to the RH side have been cut and re-soldered? I did bypass the burnt shunt with a piece of copper wire and it made no difference to the reading error so it's almost certain that there are further faults with it, I can certainly replace the shunt board with the one you have but unless I can resolve the other issues it might be to no avail and I've wasted a good board.
I've sent you a PM.
John
|