UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

19Seventy7 · 10th Oct 2019, 5:46 pm

Hi,

Sorry if this is a really stupid question, but what part is the tuning pin? Where do I contact the 2 pins to? I've never worked on tuners before, so don't really know the ins and outs of them. I've looked on the service manual but cannot distinguish the pin.

Would there be a way of getting it to tune into a locked frequency, bypassing the tuner almost? The converter I use allows me to choose frequencies to display using the whole UHF range.

Again, apologies for any silly questions.

Thank you for your help

10th Oct 2019, 5:46 pm	#41
19Seventy7 Octode Join Date: Jun 2018 Location: Essex, UK. Posts: 1,307	Re: RRI T24E Chassis Hi, Sorry if this is a really stupid question, but what part is the tuning pin? Where do I contact the 2 pins to? I've never worked on tuners before, so don't really know the ins and outs of them. I've looked on the service manual but cannot distinguish the pin. Would there be a way of getting it to tune into a locked frequency, bypassing the tuner almost? The converter I use allows me to choose frequencies to display using the whole UHF range. Again, apologies for any silly questions. Thank you for your help