View Single Post
Old 1st Dec 2021, 1:07 pm   #2
bionicmerlin's Avatar
Join Date: May 2010
Location: Warminster, Wiltshire, UK.
Posts: 550
Default Re: Bush flip clock (Bush CR232)

Don’t quote me on it but I believe the motors are Infact mains voltage . It was obviously disconnected for some reason in the first place. 2 thoughts spring to mind. Open circuit motor coil. Or clock motor got noisy ie worn or dry bearings . First thing I would do is check the coil resistance. If your meter is up to that. If it’s open circuit, your problem is finding a replacement.
Don’t over oil any clock , you will cause more harm than good. Especially any nylon gears.
I bet that car doesn't have a suppressor.
bionicmerlin is offline