UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Niechcial,Steve · 1st Nov 2017, 5:45 pm

It was tempting to try the pitch removal route, but to be honest, I am limited in the time I want to spend on this machine. So I went down the hack-off the overwind road. This did not cure the slowly dropping boost problem. So pray the fault is the main windings else I have made an expensive mistake. We won't know until early New Year because Mike Barker won't be able to rewind it till then. I'll keep you informed and thanks for all the help.

1st Nov 2017, 5:45 pm	#50
Niechcial,Steve Hexode Join Date: Jan 2007 Location: Beckenham, London, UK. Posts: 373	Re: KB VC1 width problem It was tempting to try the pitch removal route, but to be honest, I am limited in the time I want to spend on this machine. So I went down the hack-off the overwind road. This did not cure the slowly dropping boost problem. So pray the fault is the main windings else I have made an expensive mistake. We won't know until early New Year because Mike Barker won't be able to rewind it till then. I'll keep you informed and thanks for all the help.