View Single Post
Old 5th May 2021, 7:12 am   #5
DMcMahon
Dekatron
 
DMcMahon's Avatar
 
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 4,449
Default Re: Uher Royal De Luxe clipping

If you are feeding in a line level signal into the 10000 then it will clip/overload quite easily due to the DIN input being very sensitive, I normally use a 470kOhm (on both channels) attenuated Phono to DIN cable. Although this would not also explain the low playback signal.

Ensure the heads are really clean

David
DMcMahon is offline