Thread: Icom IC-H10
View Single Post
Old 18th Jun 2022, 8:34 pm   #2
SiriusHardware
Dekatron
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 8,847
Default Re: Icom IC-H10

Hello Allan, I have this but you will need a computer which can run DOS and has a real serial com port. Windows computers up to Win 98SE had a 'DOS Prompt' terminal which I think the software will happily run in so if you have a DOS/Win 3.1, Windows 95 or Windows 98 machine handy then you should be OK.

If you don't have the means to run DOS software you can send me ONE of your H10 radio bodies and I can programme it to your requirements and you can then clone that reprogrammed radio to all of the others with a simple 2.5mm to 2.5mm stereo 'crossover' cable.

Unfortunately this would have to wait a little while as I am away from base camp for a week or so and that's where the software is.

Have you looked to see if CHIRP (popular, free, radio programming software) supports the Icom H10?
SiriusHardware is online now   Reply With Quote