UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

HBWOODY · 9th Dec 2020, 10:03 am

Have measured output across 4 and 5 of the oscillator circuit and get a reading of 81mA/V. Does this mean that I should get readings at the input 1 and 2 of the amplifier circuit of 5.1 mV with the mA/V switch set to 0-6mA/V range, 15.2mV with mA/V switch set to 0-20mA/V range, 50.5mV with mA/V switch set to 0-60mv range.

9th Dec 2020, 10:03 am	#28
HBWOODY Pentode Join Date: Mar 2020 Location: Bodmin, Cornwall, UK. Posts: 212	Re: VCM 163 problem while calibrating Have measured output across 4 and 5 of the oscillator circuit and get a reading of 81mA/V. Does this mean that I should get readings at the input 1 and 2 of the amplifier circuit of 5.1 mV with the mA/V switch set to 0-6mA/V range, 15.2mV with mA/V switch set to 0-20mA/V range, 50.5mV with mA/V switch set to 0-60mv range.